
This is Vogue Patterns V1530. I love this dress with all its subtle detalils, although it took a bit of fussing to get the fit right. First off, I love the fabric, which are two different colors of this stretch cotton/linen chambray that I got from denverfabrics.com This is the yellow/pink color and this is the olive/black color. I'd buy more of this stuff if they had other colors available. I bought them on a whim because I'm always on the lookout for a good cotton/linen blend. They turned out to be great fabrics with a soft hand, great texture and weight, with the perfect amount of stretch for a woven. Also, the two colors looked great together. Winning!
I made quite a bit of small adjustments for the fit. I'm not including the photo here, but I did make the blouse version version to get an idea of the fit. The pattern says it is loose-fitting, which was fine for the blouse, but too loose for a stretch woven dress. I added these slanted front darts, some back darts, and took in the back seam a bit. I knew the slanted side seams would be difficult to adjust when completed with the trim so I sewed them with a basting stitch and tried on just the dress body without the yoke to check the fit and then re-sewed with the trim. It turns out I didn't need to adjust those seams because the darts were good enough.I trimmed away about 3/4" from the capped sleeves because they covered too much of my upper arms and seemed too large.
The details that I love most are the front hole, the slanted side seams, and the cross-over back yoke pieces. The upper yoke back required more adjustment that I thought it would. Having two back yoke pieces made it easier to fit after I narrowed the back seam a bit, but I still couldn't get as perfect and smooth a fit as I would have liked.
Here's a photo of the inside of the top front section. The pattern instruction for making the hole was far to complicated for me. What I did was wait until the yoke was complete and then sewed the hole with a piece of facing on the outside front. I then cut the hole and turned the facing to the inside. I machine edge-stitched the hole instead of the hand stitching method in the pattern. Also, you can see that I used a wide facing piece for the top of the dress body instead of a half-lining. My fabric is thick enough not to require lining, and it's hard to find a suitable stretchy lining. A lot of folks use tricot lining but I've never liked it's slimy texture and it never feels good against the skin in hot weather. And one final note -- I just sewed my side seam bands in place and did not use any of the fusing techniques in the pattern.
It looks fantastic on you Betty! The key hole front and the cross panel in the back are very stylish and elegant. I took a look through some of your recent project - they are all wonderful. You have been busy! One of these days I would love to learn to sew, and if I did my first project would be a project bag :)))
ReplyDelete